How to fix a water damaged on Blackview MAX 1

Whether in the toilet or in a swimming pool, it sometimes occurs that the Blackview MAX 1 is dropped into the water. However, it is not simply because a mobile has fallen into the water that it is inevitably dead. In truth, it is possible to redo an Blackview MAX 1 that has fallen into the water. To do this, it is required to respect specific steps. People frequently have bad reflexes and this is what can damage the Blackview MAX 1. We will first of all discover the steps to be taken after the Blackview MAX 1 has fallen into the water. We will discover in the secondary place the common mistakes that most people make.water-damaged-Blackview-MAX-1

Methods to follow in cases where your Blackview MAX 1 fell into the water

If perhaps you desire to recover your Blackview MAX 1 in operating order, we suggest that you follow the steps listed below.

Don’t try to turn the Blackview MAX 1 back on after exiting the water

The very first thing to do when the Blackview MAX 1 has fallen into the water is to turn off the mobile. In truth, in cases where it did not turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Blackview MAX 1 is switched on and wet, you may generate a short circuit and consequently toast the mobile.

Remove detachable components

When the Blackview MAX 1 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these items to dry and proceed to the next step.

Aspire the water that is in your Blackview MAX 1

Using a straw, you need to suck up the water that is contained in your Blackview MAX 1. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Blackview MAX 1, you will have the capacity to start drying it.

Dry the Blackview MAX 1

The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Blackview MAX 1 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Blackview MAX 1.

Reassemble the components and turn on the Blackview MAX 1

When you have completed the prior steps, your Blackview MAX 1 should be dry. So now you can make an attempt to turn on the Blackview MAX 1. In the event that this does not work, we suggest you to hold out a couple of days or to bring the Blackview MAX 1 to a repairman.

What should not be done in cases where the Blackview MAX 1 has fallen into the water

There are a number of things not to do when your Blackview MAX 1 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can demolish the Blackview MAX 1. Following, it is highly advised not to use a heat source to dry the Blackview MAX 1. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the Blackview MAX 1.