How to fix a water damaged on Blackview BV9600 Pro

Whether in the wc or in a pool, it occasionally happens that the Blackview BV9600 Pro is slipped in the water. Even so, it is not simply because a mobile has fallen in the water that it’s unavoidably dead. In truth, it is feasible to redo an Blackview BV9600 Pro that has fallen in the water. To accomplish this, it is required to respect certain actions. People typically have bad reflexes and this is what can damage the Blackview BV9600 Pro. We will first of all discover the techniques to be taken after the Blackview BV9600 Pro has fallen into the water. We will discover in the secondary place the common errors that many people make.water-damaged-blackview-bv9600-pro

Steps to follow in the event that your Blackview BV9600 Pro fell into the water

If you desire to restore your Blackview BV9600 Pro in operating order, we suggest that you follow the steps below.

Do not try to turn the Blackview BV9600 Pro back on after getting out the water

The very first thing to perform when the Blackview BV9600 Pro has fallen into the water is to switch off the mobile. In truth, in the event that it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Blackview BV9600 Pro is turned on and wet, you can create a short circuit and therefore toast the mobile.

Remove detachable components

Once the Blackview BV9600 Pro is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be required to take away the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and continue to the following step.

Aspire the water that is in your Blackview BV9600 Pro

Using a straw, you have got to suck up the water that is contained in your Blackview BV9600 Pro. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview BV9600 Pro, you will be able to start drying it.

Dry the Blackview BV9600 Pro

The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the Blackview BV9600 Pro in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Blackview BV9600 Pro.

Reassemble the components and turn on the Blackview BV9600 Pro

When you have completed the previous steps, your Blackview BV9600 Pro should be dry. So now you can make an attempt to turn on the Blackview BV9600 Pro. If perhaps this doesn’t perform, we suggest you to hang on some days or to bring the Blackview BV9600 Pro to a repairman.

What should not be done in the event that the Blackview BV9600 Pro has fallen into the water

There are several stuff not to perform when your Blackview BV9600 Pro has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can kill the Blackview BV9600 Pro. Next, it is strongly suggested not to use a heat source to dry the Blackview BV9600 Pro. Without a doubt, solutions which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Indeed, it could as well damage the Blackview BV9600 Pro.