Whether in the wc or in a swimming pool, it from time to time happens that the Blackview BV6800 Pro is slipped in the water. However, it isn’t simply because a mobile has fallen in the water that it is undoubtedly dead. Certainly, it is feasible to redo an Blackview BV6800 Pro that has fallen in the water. To get this done, it is essential to respect certain actions. People frequently have bad reflexes and this is what can deteriorate the Blackview BV6800 Pro. We will 1st see the methods to be taken after the Blackview BV6800 Pro has fallen into the water. We will see in the 2nd place the classical mistakes that a good number of people make.
Steps to follow if perhaps your Blackview BV6800 Pro fell into the water
In the event that you want to recover your Blackview BV6800 Pro in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Blackview BV6800 Pro back on after exiting the water
One thing to perform when the Blackview BV6800 Pro has fallen into the water is to shut off the mobile. Certainly, if perhaps it did not switch off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Blackview BV6800 Pro is switched on and wet, you can produce a short circuit and therefore toast the mobile.
Remove detachable components
Once the Blackview BV6800 Pro is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Blackview BV6800 Pro
Using a straw, you have got to suck up the water that is contained in your Blackview BV6800 Pro. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview BV6800 Pro, you will be ready to start drying it.
Dry the Blackview BV6800 Pro
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the Blackview BV6800 Pro in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Blackview BV6800 Pro.
Reassemble the components and turn on the Blackview BV6800 Pro
When you have completed the prior steps, your Blackview BV6800 Pro should be dry. So now you can make an attempt to turn on the Blackview BV6800 Pro. If this doesn’t function, we suggest you to hold out a couple of days or to bring the Blackview BV6800 Pro to a repairshop.
What should not be done if perhaps the Blackview BV6800 Pro has fallen into the water
There are a number of points not to perform when ever your Blackview BV6800 Pro has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can destroy the Blackview BV6800 Pro. Following, it is highly suggested not to use a heat source to dry the Blackview BV6800 Pro. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Certainly, it could also ruin the Blackview BV6800 Pro.
