Whether in the toilet or in a pool, it occasionally occurs that the Blackview BV6000 is slipped in the water. Nevertheless, it’s not simply because a phone has fallen in the water that it’s obviously dead. Indeed, it is feasible to redo an Blackview BV6000 that has fallen in the water. To do this, it is important to respect particular steps. People often have bad reflexes and this is what can damage the Blackview BV6000. We will 1st discover the techniques to be taken after the Blackview BV6000 has fallen into the water. We will discover in the 2nd place the common mistakes that the majority of people make.
Steps to follow if perhaps your Blackview BV6000 fell into the water
If you want to recover your Blackview BV6000 in working order, we recommend that you follow the steps listed below.
Do not attempt to turn the Blackview BV6000 back on after getting out the water
The very first thing to accomplish when the Blackview BV6000 has fallen into the water is to shut off the phone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Blackview BV6000 is switched on and wet, you may produce a short circuit and consequently toast the phone.
Remove detachable components
When the Blackview BV6000 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Blackview BV6000
By using a straw, you will have to suck up the water that is contained in your Blackview BV6000. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Blackview BV6000, you will be able to start drying it.
Dry the Blackview BV6000
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the Blackview BV6000 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Blackview BV6000.
Reassemble the components and turn on the Blackview BV6000
When you have completed the prior steps, your Blackview BV6000 should be dry. So now you can try to turn on the Blackview BV6000. If this doesn’t function, we suggest you to wait some days or to bring the Blackview BV6000 to a repairman.
What should not be done if perhaps the Blackview BV6000 has fallen into the water
You will find a number of stuff not to accomplish when ever your Blackview BV6000 has fallen into the water. The 1st is to try to turn the phone back on just after. This can destroy the Blackview BV6000. Next, it is highly suggested not to use a heat source to dry the Blackview BV6000. Certainly, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could additionally damage the Blackview BV6000.
