Whether in the wc or in a pool, it occasionally occurs that the Blackview BV5000 is dropped in the water. Even so, it is not because a telephone has fallen in the water that it is obviously dead. In fact, it is feasible to redo an Blackview BV5000 that has fallen in the water. To do this, it is required to respect specific actions. People generally have bad reflexes and this is what can damage the Blackview BV5000. We will 1st discover the techniques to be taken after the Blackview BV5000 has fallen into the water. We will discover in the 2nd place the classical errors that a good number of people make.
Methods to follow in the event that your Blackview BV5000 fell into the water
If perhaps you wish to recover your Blackview BV5000 in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Blackview BV5000 back on after exiting the water
The first thing to do when the Blackview BV5000 has fallen into the water is to turn off the telephone. In fact, in the event that it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Blackview BV5000 is switched on and wet, you can generate a short circuit and consequently toast the telephone.
Remove detachable components
Once the Blackview BV5000 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these items to dry and continue to the next step.
Aspire the water that is in your Blackview BV5000
Employing a straw, you will have to suck up the water that is contained in your Blackview BV5000. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview BV5000, you will be able to start drying it.
Dry the Blackview BV5000
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is completed, we advise you to leave the Blackview BV5000 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackview BV5000.
Reassemble the components and turn on the Blackview BV5000
When you have completed the previous steps, your Blackview BV5000 should be dry. So now you can make an attempt to turn on the Blackview BV5000. In the event that this doesn’t function, we advise you to hang on some days or to bring the Blackview BV5000 to a repairshop.
What should not be done in the event that the Blackview BV5000 has fallen into the water
You will find a number of stuff not to do when your Blackview BV5000 has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can kill the Blackview BV5000. Next, it is highly suggested not to use a heat source to dry the Blackview BV5000. Without a doubt, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could also ruin the Blackview BV5000.
