How to fix a water damaged on Asus ZenFone Laser

Whether in the wc or in a swimming pool, it sometimes happens that the Asus ZenFone Laser is dropped in the water. On the other hand, it’s not simply because a telephone has fallen in the water that it’s undoubtedly dead. In truth, it is possible to redo an Asus ZenFone Laser that has fallen in the water. To get this done, it is important to respect specific steps. People generally have bad reflexes and this is what can degrade the Asus ZenFone Laser. We will first of all see the steps to be taken after the Asus ZenFone Laser has fallen into the water. We will see in the 2nd place the classical errors that a good number of people make.water-damaged-asus-zenfone-laser

Steps to follow if your Asus ZenFone Laser fell into the water

If perhaps you wish to restore your Asus ZenFone Laser in working order, we highly recommend that you follow the steps below.

Do not try to turn the Asus ZenFone Laser back on after exiting the water

The very first thing to perform when the Asus ZenFone Laser has fallen into the water is to turn off the telephone. In truth, if it didn’t switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Asus ZenFone Laser is switched on and wet, you can create a short circuit and as a result toast the telephone.

Remove detachable components

When the Asus ZenFone Laser is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be important to remove the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and continue to the next step.

Aspire the water that is in your Asus ZenFone Laser

Utilizing a straw, you must suck up the water that is contained in your Asus ZenFone Laser. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Asus ZenFone Laser, you will be able to start drying it.

Dry the Asus ZenFone Laser

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the telephone to heat up or damage the telephone. When it is performed, we suggest you to leave the Asus ZenFone Laser in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Asus ZenFone Laser.

Reassemble the components and turn on the Asus ZenFone Laser

When you have completed the previous steps, your Asus ZenFone Laser should be dry. So now you can make an attempt to turn on the Asus ZenFone Laser. If perhaps this does not do the job, we suggest you to hang on a few days or to bring the Asus ZenFone Laser to a repairshop.

What should not be done if the Asus ZenFone Laser has fallen into the water

There are a number of things not to perform when your Asus ZenFone Laser has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Asus ZenFone Laser. Next, it is strongly suggested not to use a heat source to dry the Asus ZenFone Laser. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could likewise damage the Asus ZenFone Laser.