Whether in the wc or in a pool, it occasionally occurs that the Asus ZenFone Go is dropped in the water. However, it’s not simply because a mobile phone has fallen in the water that it is obviously dead. Certainly, it is possible to redo an Asus ZenFone Go that has fallen in the water. To get this done, it is required to respect certain actions. People frequently have bad reflexes and this is what can degrade the Asus ZenFone Go. We will first see the methods to be taken after the Asus ZenFone Go has fallen into the water. We will see in the secondary place the classical errors that many people make.
Methods to follow if your Asus ZenFone Go fell into the water
If perhaps you want to recover your Asus ZenFone Go in working order, we highly recommend that you follow the steps below.
Do not try to turn the Asus ZenFone Go back on after exiting the water
The very first thing to accomplish when the Asus ZenFone Go has fallen into the water is to turn off the mobile phone. Certainly, if it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Asus ZenFone Go is turned on and wet, you can generate a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Asus ZenFone Go is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Asus ZenFone Go
Utilizing a straw, you must suck up the water that is contained in your Asus ZenFone Go. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Asus ZenFone Go, you will have the ability to start drying it.
Dry the Asus ZenFone Go
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is finished, we suggest you to leave the Asus ZenFone Go in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Asus ZenFone Go.
Reassemble the components and turn on the Asus ZenFone Go
When you have completed the previous steps, your Asus ZenFone Go should be dry. So now you can try to turn on the Asus ZenFone Go. If perhaps this doesn’t function, we suggest you to wait a couple of days or to bring the Asus ZenFone Go to a repairman.
What should not be done if the Asus ZenFone Go has fallen into the water
You will find several points not to accomplish when your Asus ZenFone Go has fallen into the water. The first is to try to turn the mobile phone back on just after. This can demolish the Asus ZenFone Go. Next, it is highly recommended not to use a heat source to dry the Asus ZenFone Go. In fact, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could also ruin the Asus ZenFone Go.
