Whether in the toilet or in a pool, it from time to time happens that the Archos Diamond S is slipped in the water. On the other hand, it is not because a phone has fallen in the water that it’s unavoidably dead. In fact, it is possible to redo an Archos Diamond S that has fallen in the water. To accomplish this, it is needed to respect particular steps. People frequently have bad reflexes and this is what can degrade the Archos Diamond S. We will first discover the methods to be taken after the Archos Diamond S has fallen into the water. We will discover in the second place the common mistakes that the majority of people make.
Steps to follow in the event that your Archos Diamond S fell into the water
If perhaps you want to recover your Archos Diamond S in operating order, we recommend that you follow the steps below.
Don’t try to turn the Archos Diamond S back on after getting out the water
One thing to do when the Archos Diamond S has fallen into the water is to turn off the phone. In fact, in the event that it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Archos Diamond S is started and wet, you can produce a short circuit and consequently toast the phone.
Remove detachable components
Once the Archos Diamond S is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Archos Diamond S
Employing a straw, you will have to suck up the water that is contained in your Archos Diamond S. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Archos Diamond S, you will be ready to start drying it.
Dry the Archos Diamond S
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is completed, we suggest you to leave the Archos Diamond S in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Archos Diamond S.
Reassemble the components and turn on the Archos Diamond S
When you have completed the prior steps, your Archos Diamond S should be dry. So now you can try to turn on the Archos Diamond S. If perhaps this does not work, we suggest you to wait some days or to bring the Archos Diamond S to a repairshop.
What should not be done in the event that the Archos Diamond S has fallen into the water
You will find several things not to do when ever your Archos Diamond S has fallen into the water. The first is to try to turn the phone back on just after. This can kill the Archos Diamond S. Next, it is highly recommended not to use a heat source to dry the Archos Diamond S. In fact, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Indeed, it could also damage the Archos Diamond S.
