Whether in the wc or in a pool, it sometimes occurs that the ARCHOS Diamond Alpha is dropped in the water. Even so, it isn’t because a mobile has fallen in the water that it is undoubtedly dead. In fact, it is feasible to redo an ARCHOS Diamond Alpha that has fallen in the water. To achieve this, it is essential to respect specific steps. People typically have bad reflexes and this is what can deteriorate the ARCHOS Diamond Alpha. We will 1st discover the techniques to be taken after the ARCHOS Diamond Alpha has fallen into the water. We will discover in the second place the classical mistakes that a good number of people make.
Methods to follow in the event that your ARCHOS Diamond Alpha fell into the water
If you desire to recover your ARCHOS Diamond Alpha in working order, we recommend that you follow the steps below.
Do not attempt to turn the ARCHOS Diamond Alpha back on after getting out the water
The first thing to do when the ARCHOS Diamond Alpha has fallen into the water is to shut off the mobile. In fact, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the ARCHOS Diamond Alpha is turned on and wet, you can produce a short circuit and as a result toast the mobile.
Remove detachable components
When the ARCHOS Diamond Alpha is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and continue to the next step.
Aspire the water that is in your ARCHOS Diamond Alpha
Using a straw, you will need to suck up the water that is contained in your ARCHOS Diamond Alpha. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ARCHOS Diamond Alpha, you will have the capacity to start drying it.
Dry the ARCHOS Diamond Alpha
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. When it is performed, we advise you to leave the ARCHOS Diamond Alpha in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the ARCHOS Diamond Alpha.
Reassemble the components and turn on the ARCHOS Diamond Alpha
When you have completed the prior steps, your ARCHOS Diamond Alpha should be dry. So now you can try to turn on the ARCHOS Diamond Alpha. In the event that this doesn’t function, we advise you to hold out some days or to bring the ARCHOS Diamond Alpha to a repairshop.
What should not be done in the event that the ARCHOS Diamond Alpha has fallen into the water
You will find a number of points not to do when ever your ARCHOS Diamond Alpha has fallen into the water. The 1st is to try to turn the mobile back on just after. This can kill the ARCHOS Diamond Alpha. Following, it is highly advised not to use a heat source to dry the ARCHOS Diamond Alpha. Certainly, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. In fact, it could additionally damage the ARCHOS Diamond Alpha.
