Whether in the toilet or in a swimming pool, it sometimes happens that the ARCHOS Diamond 2 Plus is slipped into the water. On the other hand, it isn’t simply because a mobile has fallen into the water that it is unavoidably dead. Certainly, it is possible to redo an ARCHOS Diamond 2 Plus that has fallen into the water. To do this, it is essential to respect particular actions. People frequently have bad reflexes and this is what can degrade the ARCHOS Diamond 2 Plus. We will first discover the methods to be taken after the ARCHOS Diamond 2 Plus has fallen into the water. We will discover in the secondary place the classical errors that many people make.
Methods to follow in the event that your ARCHOS Diamond 2 Plus fell into the water
In the event that you want to restore your ARCHOS Diamond 2 Plus in operating order, we suggest that you follow the steps below.
Do not try to turn the ARCHOS Diamond 2 Plus back on after getting out the water
The first thing to do when the ARCHOS Diamond 2 Plus has fallen into the water is to turn off the mobile. Certainly, in the event that it did not switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the ARCHOS Diamond 2 Plus is turned on and wet, you could generate a short circuit and as a result toast the mobile.
Remove detachable components
Once the ARCHOS Diamond 2 Plus is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your ARCHOS Diamond 2 Plus
By using a straw, you will need to suck up the water that is contained in your ARCHOS Diamond 2 Plus. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your ARCHOS Diamond 2 Plus, you will be ready to start drying it.
Dry the ARCHOS Diamond 2 Plus
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the ARCHOS Diamond 2 Plus in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the ARCHOS Diamond 2 Plus.
Reassemble the components and turn on the ARCHOS Diamond 2 Plus
When you have completed the prior steps, your ARCHOS Diamond 2 Plus should be dry. So now you can try to turn on the ARCHOS Diamond 2 Plus. If this doesn’t function, we suggest you to wait a couple of days or to bring the ARCHOS Diamond 2 Plus to a repairman.
What should not be done in the event that the ARCHOS Diamond 2 Plus has fallen into the water
There are a number of things not to do when your ARCHOS Diamond 2 Plus has fallen into the water. The first is to try to turn the mobile back on just after. This can kill the ARCHOS Diamond 2 Plus. Following, it is strongly suggested not to use a heat source to dry the ARCHOS Diamond 2 Plus. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Indeed, it could also ruin the ARCHOS Diamond 2 Plus.
