Whether in the toilet or in a pool, it occasionally happens that the Archos Core 55P is dropped in the water. Nonetheless, it is not because a phone has fallen in the water that it is unavoidably dead. In truth, it is feasible to redo an Archos Core 55P that has fallen in the water. To get this done, it is required to respect particular actions. People frequently have bad reflexes and this is what can degrade the Archos Core 55P. We will first discover the steps to be taken after the Archos Core 55P has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Methods to follow in cases where your Archos Core 55P fell into the water
If perhaps you wish to restore your Archos Core 55P in working order, we suggest that you follow the steps below.
Don’t attempt to turn the Archos Core 55P back on after exiting the water
The first thing to accomplish when the Archos Core 55P has fallen into the water is to switch off the phone. In truth, in cases where it did not switch off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Archos Core 55P is switched on and wet, you might create a short circuit and therefore toast the phone.
Remove detachable components
Once the Archos Core 55P is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be required to take away the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and continue to the following step.
Aspire the water that is in your Archos Core 55P
By using a straw, you will have to suck up the water that is contained in your Archos Core 55P. For this, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Archos Core 55P, you will be ready to start drying it.
Dry the Archos Core 55P
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is done, we recommend you to leave the Archos Core 55P in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Archos Core 55P.
Reassemble the components and turn on the Archos Core 55P
When you have completed the prior steps, your Archos Core 55P should be dry. So now you can try to turn on the Archos Core 55P. In the event that this doesn’t do the job, we recommend you to wait some days or to bring the Archos Core 55P to a repairshop.
What should not be done in cases where the Archos Core 55P has fallen into the water
You will find several things not to accomplish when your Archos Core 55P has fallen into the water. The first is to try to turn the phone back on just after. This can destroy the Archos Core 55P. Following, it is highly advised not to use a heat source to dry the Archos Core 55P. Certainly, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could as well damage the Archos Core 55P.
