Whether in the wc or in a swimming pool, it occasionally occurs that the Archos Core 50 is slipped in the water. Nonetheless, it is not because a telephone has fallen in the water that it is undoubtedly dead. Indeed, it is feasible to redo an Archos Core 50 that has fallen in the water. To accomplish this, it is needed to respect certain actions. People typically have bad reflexes and this is what can deteriorate the Archos Core 50. We will first see the techniques to be taken after the Archos Core 50 has fallen into the water. We will see in the second place the common mistakes that a large number of people make.
Steps to follow if perhaps your Archos Core 50 fell into the water
Whenever you want to recover your Archos Core 50 in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Archos Core 50 back on after exiting the water
One thing to accomplish when the Archos Core 50 has fallen into the water is to turn off the telephone. Indeed, if perhaps it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Archos Core 50 is turned on and wet, you may make a short circuit and as a result toast the telephone.
Remove detachable components
Once the Archos Core 50 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Archos Core 50
Employing a straw, you need to suck up the water that is contained in your Archos Core 50. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Archos Core 50, you will be ready to start drying it.
Dry the Archos Core 50
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Archos Core 50 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Archos Core 50.
Reassemble the components and turn on the Archos Core 50
When you have completed the previous steps, your Archos Core 50 should be dry. So now you can try to turn on the Archos Core 50. If perhaps this doesn’t perform, we recommend you to hold out some days or to bring the Archos Core 50 to a repairshop.
What should not be done if perhaps the Archos Core 50 has fallen into the water
You will find several things not to accomplish when your Archos Core 50 has fallen into the water. The first is to try to turn the telephone back on just after. This can destroy the Archos Core 50. Following, it is strongly suggested not to use a heat source to dry the Archos Core 50. In fact, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could also damage the Archos Core 50.
