Whether in the toilet or in a pool, it occasionally occurs that the Archos 62 is slipped in the water. Nevertheless, it is not because a mobile has fallen in the water that it is obviously dead. In fact, it is feasible to redo an Archos 62 that has fallen in the water. To accomplish this, it is important to respect certain actions. People generally have bad reflexes and this is what can damage the Archos 62. We will first of all see the steps to be taken after the Archos 62 has fallen into the water. We will see in the secondary place the common errors that many people make.
Steps to follow in the event that your Archos 62 fell into the water
If you need to recover your Archos 62 in operating order, we highly recommend that you follow the steps below.
Do not try to turn the Archos 62 back on after getting out the water
The first thing to do when the Archos 62 has fallen into the water is to shut off the mobile. In fact, in the event that it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Archos 62 is turned on and wet, you may produce a short circuit and as a result toast the mobile.
Remove detachable components
Once the Archos 62 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it’ll be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Archos 62
Using a straw, you will have to suck up the water that is contained in your Archos 62. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Archos 62, you will have the ability to start drying it.
Dry the Archos 62
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Avoid using procédures that cause the mobile to heat up or damage the mobile. Once it is completed, we advise you to leave the Archos 62 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Archos 62.
Reassemble the components and turn on the Archos 62
When you have completed the previous steps, your Archos 62 should be dry. So now you can make an attempt to turn on the Archos 62. In the event that this doesn’t perform, we advise you to wait a few days or to bring the Archos 62 to a repairshop.
What should not be done in the event that the Archos 62 has fallen into the water
There are several stuff not to do when ever your Archos 62 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can kill the Archos 62. Next, it is highly advised not to use a heat source to dry the Archos 62. In fact, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could likewise ruin the Archos 62.
