Whether in the wc or in a pool, it sometimes occurs that the Archos 50d Helium is dropped in the water. Nevertheless, it isn’t simply because a mobile has fallen in the water that it’s inevitably dead. In fact, it is possible to redo an Archos 50d Helium that has fallen in the water. To achieve this, it is important to respect certain steps. People frequently have bad reflexes and this is what can degrade the Archos 50d Helium. We will first of all discover the methods to be taken after the Archos 50d Helium has fallen into the water. We will discover in the secondary place the classical errors that a good number of people make.
Methods to follow in the event that your Archos 50d Helium fell into the water
In the event that you need to restore your Archos 50d Helium in working order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Archos 50d Helium back on after getting out the water
One thing to do when the Archos 50d Helium has fallen into the water is to shut off the mobile. In fact, in the event that it didn’t switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Archos 50d Helium is switched on and wet, you could create a short circuit and therefore toast the mobile.
Remove detachable components
When the Archos 50d Helium is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be important to take away the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Archos 50d Helium
Utilizing a straw, you will need to suck up the water that is contained in your Archos 50d Helium. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Archos 50d Helium, you will have the capacity to start drying it.
Dry the Archos 50d Helium
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Avoid using procédures that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Archos 50d Helium in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Archos 50d Helium.
Reassemble the components and turn on the Archos 50d Helium
When you have completed the prior steps, your Archos 50d Helium should be dry. So now you can try to turn on the Archos 50d Helium. If perhaps this does not perform, we advise you to hang on a few days or to bring the Archos 50d Helium to a repairman.
What should not be done in the event that the Archos 50d Helium has fallen into the water
There are several things not to do when your Archos 50d Helium has fallen into the water. The first of all is to try to turn the mobile back on just after. This can kill the Archos 50d Helium. Next, it is highly advised not to use a heat source to dry the Archos 50d Helium. Indeed, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also ruin the Archos 50d Helium.
