Whether in the wc or in a swimming pool, it occasionally occurs that the Alcatel is dropped in the water. Nonetheless, it is not because a telephone has fallen in the water that it is inevitably dead. In fact, it is feasible to redo an Alcatel that has fallen in the water. To accomplish this, it is important to respect particular steps. People frequently have bad reflexes and this is what can damage the Alcatel. We will first of all see the steps to be taken after the Alcatel has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow in the event that your Alcatel fell into the water
In the event that you need to restore your Alcatel in working order, we advise that you follow the steps listed below.
Do not attempt to turn the Alcatel back on after exiting the water
The first thing to accomplish when the Alcatel has fallen into the water is to shut off the telephone. In fact, in the event that it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel is turned on and wet, you might generate a short circuit and as a result toast the telephone.
Remove detachable components
When the Alcatel is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will be important to remove the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and continue to the following step.
Aspire the water that is in your Alcatel
Using a straw, you will have to suck up the water that is contained in your Alcatel. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Alcatel, you will have the ability to start drying it.
Dry the Alcatel
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is finished, we recommend you to leave the Alcatel in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Alcatel.
Reassemble the components and turn on the Alcatel
When you have completed the previous steps, your Alcatel should be dry. So now you can make an attempt to turn on the Alcatel. If perhaps this does not function, we recommend you to hold out some days or to bring the Alcatel to a repairshop.
What should not be done in the event that the Alcatel has fallen into the water
You will find a number of things not to accomplish when your Alcatel has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Alcatel. Next, it is strongly recommended not to use a heat source to dry the Alcatel. Without a doubt, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could as well ruin the Alcatel.
