Whether in the toilet or in a swimming pool, it sometimes occurs that the Alcatel Pixi 4 is slipped in the water. Nonetheless, it isn’t simply because a mobile phone has fallen in the water that it is obviously dead. In truth, it is feasible to redo an Alcatel Pixi 4 that has fallen in the water. To accomplish this, it is needed to respect particular actions. People frequently have bad reflexes and this is what can degrade the Alcatel Pixi 4. We will first discover the techniques to be taken after the Alcatel Pixi 4 has fallen into the water. We will discover in the second place the common mistakes that the majority of people make.
Steps to follow if perhaps your Alcatel Pixi 4 fell into the water
Whenever you wish to restore your Alcatel Pixi 4 in working order, we highly recommend that you follow the steps listed below.
Do not try to turn the Alcatel Pixi 4 back on after exiting the water
The first thing to perform when the Alcatel Pixi 4 has fallen into the water is to shut off the mobile phone. In truth, if perhaps it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Alcatel Pixi 4 is turned on and wet, you might make a short circuit and as a result toast the mobile phone.
Remove detachable components
Once the Alcatel Pixi 4 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Alcatel Pixi 4
Employing a straw, you will need to suck up the water that is contained in your Alcatel Pixi 4. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Alcatel Pixi 4, you will be ready to start drying it.
Dry the Alcatel Pixi 4
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we recommend you to leave the Alcatel Pixi 4 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Alcatel Pixi 4.
Reassemble the components and turn on the Alcatel Pixi 4
When you have completed the prior steps, your Alcatel Pixi 4 should be dry. So now you can make an attempt to turn on the Alcatel Pixi 4. If perhaps this does not function, we recommend you to hang on some days or to bring the Alcatel Pixi 4 to a repairshop.
What should not be done if perhaps the Alcatel Pixi 4 has fallen into the water
You will find several points not to perform when ever your Alcatel Pixi 4 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can destroy the Alcatel Pixi 4. Following, it is highly suggested not to use a heat source to dry the Alcatel Pixi 4. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could also damage the Alcatel Pixi 4.
