Whether in the wc or in a swimming pool, it sometimes happens that the Alcatel One Touch Scribe is slipped in the water. Nevertheless, it isn’t because a telephone has fallen in the water that it’s undoubtedly dead. In fact, it is possible to redo an Alcatel One Touch Scribe that has fallen in the water. To get this done, it is essential to respect specific actions. People typically have bad reflexes and this is what can degrade the Alcatel One Touch Scribe. We will 1st see the methods to be taken after the Alcatel One Touch Scribe has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.
Methods to follow in the event that your Alcatel One Touch Scribe fell into the water
If perhaps you want to recover your Alcatel One Touch Scribe in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Alcatel One Touch Scribe back on after exiting the water
One thing to do when the Alcatel One Touch Scribe has fallen into the water is to switch off the telephone. In fact, in the event that it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel One Touch Scribe is started and wet, you can produce a short circuit and therefore toast the telephone.
Remove detachable components
Once the Alcatel One Touch Scribe is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Alcatel One Touch Scribe
By using a straw, you will have to suck up the water that is contained in your Alcatel One Touch Scribe. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Alcatel One Touch Scribe, you will be able to start drying it.
Dry the Alcatel One Touch Scribe
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is completed, we recommend you to leave the Alcatel One Touch Scribe in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Alcatel One Touch Scribe.
Reassemble the components and turn on the Alcatel One Touch Scribe
When you have completed the previous steps, your Alcatel One Touch Scribe should be dry. So now you can make an attempt to turn on the Alcatel One Touch Scribe. If perhaps this does not work, we recommend you to hang on a few days or to bring the Alcatel One Touch Scribe to a repairman.
What should not be done in the event that the Alcatel One Touch Scribe has fallen into the water
You will find a number of stuff not to do when ever your Alcatel One Touch Scribe has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can demolish the Alcatel One Touch Scribe. Following, it is strongly advised not to use a heat source to dry the Alcatel One Touch Scribe. In fact, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could additionally ruin the Alcatel One Touch Scribe.
