Whether in the toilet or in a pool, it sometimes happens that the Alcatel One Touch Go Play is slipped into the water. However, it is not simply because a mobile has fallen into the water that it is undoubtedly dead. In fact, it is possible to redo an Alcatel One Touch Go Play that has fallen into the water. To get this done, it is essential to respect certain steps. People frequently have bad reflexes and this is what can degrade the Alcatel One Touch Go Play. We will first discover the steps to be taken after the Alcatel One Touch Go Play has fallen into the water. We will discover in the secondary place the common errors that the majority of people make.
Methods to follow in the event that your Alcatel One Touch Go Play fell into the water
Whenever you desire to restore your Alcatel One Touch Go Play in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Alcatel One Touch Go Play back on after getting out the water
One thing to perform when the Alcatel One Touch Go Play has fallen into the water is to turn off the mobile. In fact, in the event that it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Alcatel One Touch Go Play is started and wet, you can make a short circuit and as a result toast the mobile.
Remove detachable components
When the Alcatel One Touch Go Play is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be essential to remove the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Alcatel One Touch Go Play
Using a straw, you need to suck up the water that is contained in your Alcatel One Touch Go Play. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Alcatel One Touch Go Play, you will be ready to start drying it.
Dry the Alcatel One Touch Go Play
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Alcatel One Touch Go Play in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Alcatel One Touch Go Play.
Reassemble the components and turn on the Alcatel One Touch Go Play
When you have completed the previous steps, your Alcatel One Touch Go Play should be dry. So now you can try to turn on the Alcatel One Touch Go Play. If perhaps this doesn’t perform, we suggest you to hang on a few days or to bring the Alcatel One Touch Go Play to a repairman.
What should not be done in the event that the Alcatel One Touch Go Play has fallen into the water
You will find a number of stuff not to perform when your Alcatel One Touch Go Play has fallen into the water. The first is to try to turn the mobile back on just after. This can destroy the Alcatel One Touch Go Play. Next, it is strongly recommended not to use a heat source to dry the Alcatel One Touch Go Play. In fact, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could also damage the Alcatel One Touch Go Play.
