Whether in the wc or in a pool, it occasionally happens that the Alcatel GO PLAY is dropped into the water. Even so, it isn’t simply because a phone has fallen into the water that it is unavoidably dead. In fact, it is possible to redo an Alcatel GO PLAY that has fallen into the water. To get this done, it is needed to respect particular actions. People typically have bad reflexes and this is what can damage the Alcatel GO PLAY. We will first see the methods to be taken after the Alcatel GO PLAY has fallen into the water. We will see in the second place the classical mistakes that a good number of people make.
Methods to follow if your Alcatel GO PLAY fell into the water
If perhaps you wish to restore your Alcatel GO PLAY in operating order, we advise that you follow the steps below.
Do not attempt to turn the Alcatel GO PLAY back on after getting out the water
The very first thing to accomplish when the Alcatel GO PLAY has fallen into the water is to turn off the phone. In fact, if it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Alcatel GO PLAY is turned on and wet, you could produce a short circuit and as a result toast the phone.
Remove detachable components
Once the Alcatel GO PLAY is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Alcatel GO PLAY
Using a straw, you will have to suck up the water that is contained in your Alcatel GO PLAY. For this, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Alcatel GO PLAY, you will have the capacity to start drying it.
Dry the Alcatel GO PLAY
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Alcatel GO PLAY in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Alcatel GO PLAY.
Reassemble the components and turn on the Alcatel GO PLAY
When you have completed the previous steps, your Alcatel GO PLAY should be dry. So now you can make an attempt to turn on the Alcatel GO PLAY. If perhaps this does not do the job, we recommend you to hold out a couple of days or to bring the Alcatel GO PLAY to a repairshop.
What should not be done if the Alcatel GO PLAY has fallen into the water
There are several things not to accomplish when ever your Alcatel GO PLAY has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the Alcatel GO PLAY. Next, it is highly advised not to use a heat source to dry the Alcatel GO PLAY. In fact, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could also ruin the Alcatel GO PLAY.
