How to fix a water damaged on Alcatel 3

Whether in the wc or in a pool, it from time to time happens that the Alcatel 3 is slipped in the water. Even so, it isn’t simply because a phone has fallen in the water that it’s undoubtedly dead. Certainly, it is possible to redo an Alcatel 3 that has fallen in the water. To do this, it is important to respect specific steps. People typically have bad reflexes and this is what can degrade the Alcatel 3. We will first of all see the techniques to be taken after the Alcatel 3 has fallen into the water. We will see in the second place the classical mistakes that a good number of people make.water-damaged-Alcatel-3

Methods to follow if your Alcatel 3 fell into the water

If you wish to recover your Alcatel 3 in working order, we advise that you follow the steps below.

Don’t try to turn the Alcatel 3 back on after getting out the water

The very first thing to perform when the Alcatel 3 has fallen into the water is to shut off the phone. Certainly, if it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Alcatel 3 is turned on and wet, you can make a short circuit and therefore toast the phone.

Remove detachable components

When the Alcatel 3 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be important to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Alcatel 3

Utilizing a straw, you must suck up the water that is contained in your Alcatel 3. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Alcatel 3, you will be able to start drying it.

Dry the Alcatel 3

The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the phone to heat up or damage the phone. When it is finished, we suggest you to leave the Alcatel 3 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Alcatel 3.

Reassemble the components and turn on the Alcatel 3

When you have completed the prior steps, your Alcatel 3 should be dry. So now you can try to turn on the Alcatel 3. If perhaps this doesn’t perform, we suggest you to hold out a couple of days or to bring the Alcatel 3 to a repairman.

What should not be done if the Alcatel 3 has fallen into the water

There are a number of stuff not to perform when ever your Alcatel 3 has fallen into the water. The first of all is to try to turn the phone back on just after. This can destroy the Alcatel 3. Following, it is highly suggested not to use a heat source to dry the Alcatel 3. Indeed, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Indeed, it could additionally ruin the Alcatel 3.