How to fix a water damaged on Alcatel 1

Whether in the toilet or in a swimming pool, it sometimes occurs that the Alcatel 1 is dropped into the water. On the other hand, it’s not simply because a cellphone has fallen into the water that it’s obviously dead. In truth, it is possible to redo an Alcatel 1 that has fallen into the water. To get this done, it is needed to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Alcatel 1. We will first see the methods to be taken after the Alcatel 1 has fallen into the water. We will see in the secondary place the classical errors that many people make.water-damaged-Alcatel-1

Methods to follow in cases where your Alcatel 1 fell into the water

Whenever you want to recover your Alcatel 1 in working order, we advise that you follow the steps below.

Don’t try to turn the Alcatel 1 back on after exiting the water

One thing to perform when the Alcatel 1 has fallen into the water is to switch off the cellphone. In truth, in cases where it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Alcatel 1 is turned on and wet, you may create a short circuit and as a result toast the cellphone.

Remove detachable components

Once the Alcatel 1 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it’ll be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and proceed to the next step.

Aspire the water that is in your Alcatel 1

By using a straw, you need to suck up the water that is contained in your Alcatel 1. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Alcatel 1, you will be able to start drying it.

Dry the Alcatel 1

The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using techniques that cause the cellphone to heat up or damage the cellphone. Once it is finished, we recommend you to leave the Alcatel 1 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Alcatel 1.

Reassemble the components and turn on the Alcatel 1

When you have completed the previous steps, your Alcatel 1 should be dry. So now you can make an attempt to turn on the Alcatel 1. If perhaps this does not function, we recommend you to hang on a couple of days or to bring the Alcatel 1 to a repairman.

What should not be done in cases where the Alcatel 1 has fallen into the water

You will find several things not to perform when your Alcatel 1 has fallen into the water. The first is to make an attempt to turn the cellphone back on just after. This can demolish the Alcatel 1. Following, it is highly suggested not to use a heat source to dry the Alcatel 1. In fact, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the Alcatel 1.