Whether in the toilet or in a pool, it sometimes occurs that the Acer Liquid Z6 Plus is slipped in the water. Nonetheless, it is not simply because a mobile phone has fallen in the water that it is undoubtedly dead. In truth, it is possible to redo an Acer Liquid Z6 Plus that has fallen in the water. To accomplish this, it is essential to respect certain actions. People generally have bad reflexes and this is what can deteriorate the Acer Liquid Z6 Plus. We will first of all see the steps to be taken after the Acer Liquid Z6 Plus has fallen into the water. We will see in the 2nd place the common mistakes that the majority of people make.
Methods to follow if perhaps your Acer Liquid Z6 Plus fell into the water
In the event that you desire to recover your Acer Liquid Z6 Plus in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Acer Liquid Z6 Plus back on after getting out the water
One thing to accomplish when the Acer Liquid Z6 Plus has fallen into the water is to shut off the mobile phone. In truth, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Acer Liquid Z6 Plus is switched on and wet, you could produce a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Acer Liquid Z6 Plus is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Acer Liquid Z6 Plus
By using a straw, you will need to suck up the water that is contained in your Acer Liquid Z6 Plus. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Acer Liquid Z6 Plus, you will have the capacity to start drying it.
Dry the Acer Liquid Z6 Plus
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is performed, we suggest you to leave the Acer Liquid Z6 Plus in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Acer Liquid Z6 Plus.
Reassemble the components and turn on the Acer Liquid Z6 Plus
When you have completed the previous steps, your Acer Liquid Z6 Plus should be dry. So now you can try to turn on the Acer Liquid Z6 Plus. In the event that this doesn’t function, we suggest you to hold out some days or to bring the Acer Liquid Z6 Plus to a repairman.
What should not be done if perhaps the Acer Liquid Z6 Plus has fallen into the water
You will find a number of points not to accomplish when ever your Acer Liquid Z6 Plus has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can demolish the Acer Liquid Z6 Plus. Following, it is highly recommended not to use a heat source to dry the Acer Liquid Z6 Plus. Indeed, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could likewise damage the Acer Liquid Z6 Plus.
