Whether in the toilet or in a pool, it from time to time occurs that the Acer Liquid Z520 is slipped into the water. However, it’s not because a phone has fallen into the water that it is inevitably dead. In fact, it is feasible to redo an Acer Liquid Z520 that has fallen into the water. To achieve this, it is important to respect particular actions. People often have bad reflexes and this is what can deteriorate the Acer Liquid Z520. We will first see the techniques to be taken after the Acer Liquid Z520 has fallen into the water. We will see in the 2nd place the common errors that the majority of people make.
Steps to follow in cases where your Acer Liquid Z520 fell into the water
If you desire to restore your Acer Liquid Z520 in operating order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Acer Liquid Z520 back on after getting out the water
The first thing to perform when the Acer Liquid Z520 has fallen into the water is to switch off the phone. In fact, in cases where it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Acer Liquid Z520 is switched on and wet, you might produce a short circuit and consequently toast the phone.
Remove detachable components
Once the Acer Liquid Z520 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Acer Liquid Z520
Employing a straw, you must suck up the water that is contained in your Acer Liquid Z520. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Acer Liquid Z520, you will be ready to start drying it.
Dry the Acer Liquid Z520
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is done, we suggest you to leave the Acer Liquid Z520 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Acer Liquid Z520.
Reassemble the components and turn on the Acer Liquid Z520
When you have completed the previous steps, your Acer Liquid Z520 should be dry. So now you can make an attempt to turn on the Acer Liquid Z520. If perhaps this does not function, we suggest you to hang on some days or to bring the Acer Liquid Z520 to a repairshop.
What should not be done in cases where the Acer Liquid Z520 has fallen into the water
There are a number of things not to perform when your Acer Liquid Z520 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can demolish the Acer Liquid Z520. Following, it is highly suggested not to use a heat source to dry the Acer Liquid Z520. In fact, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Indeed, it could likewise damage the Acer Liquid Z520.
