Whether in the wc or in a swimming pool, it occasionally happens that the Acer Liquid Z220 is slipped in the water. Even so, it isn’t simply because a cellphone has fallen in the water that it’s unavoidably dead. Indeed, it is possible to redo an Acer Liquid Z220 that has fallen in the water. To accomplish this, it is necessary to respect certain actions. People generally have bad reflexes and this is what can damage the Acer Liquid Z220. We will first of all discover the methods to be taken after the Acer Liquid Z220 has fallen into the water. We will discover in the 2nd place the classical errors that a good number of people make.
Methods to follow in cases where your Acer Liquid Z220 fell into the water
Whenever you wish to restore your Acer Liquid Z220 in working order, we advise that you follow the steps below.
Do not attempt to turn the Acer Liquid Z220 back on after getting out the water
The very first thing to do when the Acer Liquid Z220 has fallen into the water is to turn off the cellphone. Indeed, in cases where it did not turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Acer Liquid Z220 is switched on and wet, you can create a short circuit and therefore toast the cellphone.
Remove detachable components
When the Acer Liquid Z220 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be necessary to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Acer Liquid Z220
Using a straw, you will need to suck up the water that is contained in your Acer Liquid Z220. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Acer Liquid Z220, you will have the capacity to start drying it.
Dry the Acer Liquid Z220
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. When it is done, we recommend you to leave the Acer Liquid Z220 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Acer Liquid Z220.
Reassemble the components and turn on the Acer Liquid Z220
When you have completed the prior steps, your Acer Liquid Z220 should be dry. So now you can make an attempt to turn on the Acer Liquid Z220. If perhaps this doesn’t work, we recommend you to hang on a few days or to bring the Acer Liquid Z220 to a repairman.
What should not be done in cases where the Acer Liquid Z220 has fallen into the water
You will find a number of things not to do when your Acer Liquid Z220 has fallen into the water. The first of all is to make an attempt to turn the cellphone back on just after. This can destroy the Acer Liquid Z220. Next, it is strongly suggested not to use a heat source to dry the Acer Liquid Z220. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could additionally ruin the Acer Liquid Z220.
