How to fix a water damaged on Acer Liquid M220

Whether in the toilet or in a pool, it occasionally happens that the Acer Liquid M220 is dropped in the water. Nevertheless, it isn’t simply because a phone has fallen in the water that it’s obviously dead. Indeed, it is possible to redo an Acer Liquid M220 that has fallen in the water. To get this done, it is essential to respect particular steps. People generally have bad reflexes and this is what can damage the Acer Liquid M220. We will first of all see the techniques to be taken after the Acer Liquid M220 has fallen into the water. We will see in the secondary place the classical mistakes that many people make.water-damaged-Acer-Liquid-M220

Steps to follow if your Acer Liquid M220 fell into the water

If perhaps you wish to recover your Acer Liquid M220 in operating order, we recommend that you follow the steps listed below.

Don’t try to turn the Acer Liquid M220 back on after exiting the water

The first thing to perform when the Acer Liquid M220 has fallen into the water is to switch off the phone. Indeed, if it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Acer Liquid M220 is started and wet, you might generate a short circuit and as a result toast the phone.

Remove detachable components

Once the Acer Liquid M220 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and continue to the following step.

Aspire the water that is in your Acer Liquid M220

Employing a straw, you will need to suck up the water that is contained in your Acer Liquid M220. For this, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Acer Liquid M220, you will be able to start drying it.

Dry the Acer Liquid M220

The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Acer Liquid M220 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Acer Liquid M220.

Reassemble the components and turn on the Acer Liquid M220

When you have completed the prior steps, your Acer Liquid M220 should be dry. So now you can make an attempt to turn on the Acer Liquid M220. If this doesn’t work, we recommend you to hold out a couple of days or to bring the Acer Liquid M220 to a repairshop.

What should not be done if the Acer Liquid M220 has fallen into the water

You will find several stuff not to perform when ever your Acer Liquid M220 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Acer Liquid M220. Following, it is highly advised not to use a heat source to dry the Acer Liquid M220. Certainly, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Acer Liquid M220.