Whether in the wc or in a swimming pool, it from time to time happens that the Acer Liquid Jade Z is dropped in the water. However, it is not simply because a cellphone has fallen in the water that it’s unavoidably dead. Certainly, it is feasible to redo an Acer Liquid Jade Z that has fallen in the water. To accomplish this, it is necessary to respect certain actions. People frequently have bad reflexes and this is what can damage the Acer Liquid Jade Z. We will first of all see the methods to be taken after the Acer Liquid Jade Z has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow if perhaps your Acer Liquid Jade Z fell into the water
If you wish to restore your Acer Liquid Jade Z in operating order, we advise that you follow the steps listed below.
Don’t try to turn the Acer Liquid Jade Z back on after getting out the water
The very first thing to accomplish when the Acer Liquid Jade Z has fallen into the water is to switch off the cellphone. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Acer Liquid Jade Z is switched on and wet, you might make a short circuit and therefore toast the cellphone.
Remove detachable components
When the Acer Liquid Jade Z is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Acer Liquid Jade Z
Utilizing a straw, you need to suck up the water that is contained in your Acer Liquid Jade Z. For this, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Acer Liquid Jade Z, you will be able to start drying it.
Dry the Acer Liquid Jade Z
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the cellphone to heat up or damage the cellphone. When it is done, we recommend you to leave the Acer Liquid Jade Z in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Acer Liquid Jade Z.
Reassemble the components and turn on the Acer Liquid Jade Z
When you have completed the previous steps, your Acer Liquid Jade Z should be dry. So now you can try to turn on the Acer Liquid Jade Z. In the event that this does not function, we recommend you to wait some days or to bring the Acer Liquid Jade Z to a repairshop.
What should not be done if perhaps the Acer Liquid Jade Z has fallen into the water
There are several stuff not to accomplish when ever your Acer Liquid Jade Z has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can destroy the Acer Liquid Jade Z. Next, it is highly suggested not to use a heat source to dry the Acer Liquid Jade Z. Without a doubt, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also damage the Acer Liquid Jade Z.
