Whether in the wc or in a pool, it from time to time occurs that the Acer Liquid E3 plus is slipped in the water. However, it’s not because a telephone has fallen in the water that it is undoubtedly dead. In fact, it is possible to redo an Acer Liquid E3 plus that has fallen in the water. To get this done, it is necessary to respect certain actions. People often have bad reflexes and this is what can deteriorate the Acer Liquid E3 plus. We will 1st see the methods to be taken after the Acer Liquid E3 plus has fallen into the water. We will see in the second place the common errors that a good number of people make.
Methods to follow if perhaps your Acer Liquid E3 plus fell into the water
In the event that you wish to restore your Acer Liquid E3 plus in working order, we suggest that you follow the steps below.
Don’t try to turn the Acer Liquid E3 plus back on after exiting the water
One thing to do when the Acer Liquid E3 plus has fallen into the water is to turn off the telephone. In fact, if perhaps it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Acer Liquid E3 plus is turned on and wet, you can create a short circuit and consequently toast the telephone.
Remove detachable components
Once the Acer Liquid E3 plus is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Acer Liquid E3 plus
By using a straw, you must suck up the water that is contained in your Acer Liquid E3 plus. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Acer Liquid E3 plus, you will have the ability to start drying it.
Dry the Acer Liquid E3 plus
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Acer Liquid E3 plus in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Acer Liquid E3 plus.
Reassemble the components and turn on the Acer Liquid E3 plus
When you have completed the previous steps, your Acer Liquid E3 plus should be dry. So now you can make an attempt to turn on the Acer Liquid E3 plus. In the event that this doesn’t do the job, we recommend you to wait some days or to bring the Acer Liquid E3 plus to a repairman.
What should not be done if perhaps the Acer Liquid E3 plus has fallen into the water
There are a number of points not to do when your Acer Liquid E3 plus has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can destroy the Acer Liquid E3 plus. Following, it is highly suggested not to use a heat source to dry the Acer Liquid E3 plus. Without a doubt, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally ruin the Acer Liquid E3 plus.
