From time to time, the CUBOT Manito displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly originate from a lot of places. So, so that you can connect properly to the Wifi network with your CUBOT Manito, we decided to produce this guide. So we will find out together what to do and where to look to resolve this problem of Wifi authentication. We will see at initially what you must do on the CUBOT Manito. Finally, we will see what it can be required to do and check on your Wifi box.
How to proceed when the CUBOT Manito has an authentication problem on the Wifi network
Forget the Wifi network on your CUBOT Manito
If perhaps the Wi-Fi network to which you desire to connect has been changed since your last authentication, your CUBOT Manito may display the message: Authentication or authentication error . If perhaps the problem comes from there, the answer is fairly simple. Simply forget about the Wifi network in your CUBOT Manito. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is carried out, you can try again to connect to the Wifi network. In the event that the problem is not resolved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the CUBOT Manito because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it can be incredibly simple. You should find a synchronization button to press. When this is carried out, a light will most of the time start blinking. Youre able to then try to reconnect to the Wifi network with your CUBOT Manito. If perhaps it still will not work, go to the next trick.
Retype Password
From time to time the authentication problem originates from the technique you type the Wifi network security password. In fact, it can be sometimes subtle to type a security password Wifi on its CUBOT Manito. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several computer problems, the solution is from time to time incredibly simple. In fact, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your CUBOT Manito. Then try to reconnect with your CUBOT Manito.
Check box settings
If perhaps non-e of the previous solutions did work, the problem could possibly be found to be on the box of your provider. It will for that reason be required to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . If perhaps this is not the case, choose this option. Then try to connect your CUBOT Manito again to Wifi. If perhaps the authentication problem continues, we advise that you contact your service provider or a telephone retail store.
