Occasionally, the CUBOT Dinosaur displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can possibly come from several places. So, so that you can actually connect properly to the Wifi network with your CUBOT Dinosaur, we decided to produce this tuto. So we will observe together what to do and where to look to resolve this problem of Wifi authentication. We will see at 1st what you have to do on the CUBOT Dinosaur. At last, we will see what it is required to do and check on your Wifi box.
How to proceed when the CUBOT Dinosaur has an authentication problem on the Wifi network
Forget the Wifi network on your CUBOT Dinosaur
If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your CUBOT Dinosaur may display the text: Authentication or authentication error . If the problem comes from there, the solution is straightforward. Just forget about the Wifi network in your CUBOT Dinosaur. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . When it is done, you can actually try again to connect to the Wifi network. If perhaps the problem is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a problem of authentication Wifi on the CUBOT Dinosaur because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it is incredibly simple. You should find a synchronization button to press. When this is done, a light will normally start blinking. You can after that try to reconnect to the Wifi network with your CUBOT Dinosaur. If it still will not function, go to the next trick.
Retype Security password
Occasionally the authentication problem comes from the method you type the Wifi network security password. Indeed, it is sometimes subtle to type a security password Wifi on its CUBOT Dinosaur. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in lots of laptop problems, the solution is occasionally incredibly simple. Indeed, 80% of the laptop problems are solved by restarting the machine. We therefore advise you to restart your box and your CUBOT Dinosaur. After that try to reconnect with your CUBOT Dinosaur.
Check box settings
If non-e of the prior solutions did function, the problem may be found to be on the box of your provider. It will for that reason be required to go in the parameters of the box and to test in cases where the system of key is in WPA / WPA2 . If this is not the case, choose this option. After that try to connect your CUBOT Dinosaur again to Wifi. If the authentication problem continues, we advise that you contact your service provider or a telephone retail store.
