Crosscall TREKKER-X2: Wifi Authentication Problem

At times, the Crosscall TREKKER-X2 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially be caused by many places. So, so that you may connect properly to the Wifi network with your Crosscall TREKKER-X2, we decided to write this tuto. So we will observe together what to do and where to look to resolve this issue of Wifi authentication. We will see at first of all what you need to do on the Crosscall TREKKER-X2. Finally, we will see what it is required to do and check on your Wifi box.

What to do when the Crosscall TREKKER-X2 has an authentication problem on the Wifi network

Forget the Wifi network on your Crosscall TREKKER-X2

If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Crosscall TREKKER-X2 may display the text: Authentication or authentication error . If the problem comes from there, the solution is quite easy. Just forget about the Wifi network in your Crosscall TREKKER-X2. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. In the event that the problem is not resolved, go to the next step.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Crosscall TREKKER-X2 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is incredibly simple. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You’re able to then try to reconnect to the Wifi network with your Crosscall TREKKER-X2. If it still will not function, go to the next trick.

Retype Password

At times the authentication problem comes from the solution you type the Wifi network password. In truth, it is sometimes subtle to type a password Wifi on its Crosscall TREKKER-X2. We therefore advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in many pc problems, the solution is sometimes incredibly simple. In truth, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your Crosscall TREKKER-X2. Then try to reconnect with your Crosscall TREKKER-X2.

Check box settings

If non-e of the prior answers did function, the problem may perhaps be found to be on the box of your provider. It will therefore be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If this is not the circumstance, choose this option. Then try to connect your Crosscall TREKKER-X2 again to Wifi. If the authentication problem remains, we recommend that you contact your service provider or a telephone retail store.