At times, the Crosscall TREKKER-X1 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can possibly come from a lot of places. So, so that you may connect properly to the Wifi network with your Crosscall TREKKER-X1, we decided to write this guide. So we will see together what to do and where to look to solve this issue of Wifi authentication. We will see at initially what you need to do on the Crosscall TREKKER-X1. At last, we will see what it truly is necessary to do and check on your Wifi box.
What to do when the Crosscall TREKKER-X1 has an authentication problem on the Wifi network
Forget the Wifi network on your Crosscall TREKKER-X1
If the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Crosscall TREKKER-X1 may display the text message: Authentication or authentication error . If the issue comes from there, the solution is very simple. Just forget about the Wifi network in your Crosscall TREKKER-X1. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. If perhaps the issue is not fixed, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a issue of authentication Wifi on the Crosscall TREKKER-X1 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it truly is incredibly simple. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You can after that try to reconnect to the Wifi network with your Crosscall TREKKER-X1. If it still doesn’t work, go to the next trick.
Retype Password
At times the authentication problem originates from the method you type the Wifi network security password. In truth, it truly is sometimes subtle to type a security password Wifi on its Crosscall TREKKER-X1. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in many computer problems, the solution is from time to time incredibly simple. In truth, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Crosscall TREKKER-X1. Then try to reconnect with your Crosscall TREKKER-X1.
Check box settings
If none of the prior answers did work, the problem could be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to test in cases where the system of key is in WPA / WPA2 . If this is not the case, select this option. Then try to connect your Crosscall TREKKER-X1 again to Wifi. If the authentication issue continues, we recommend that you contact your service provider or a telephone store.
