Crosscall TREKKER-M1: Wifi Authentication Problem

Occasionally, the Crosscall TREKKER-M1 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can potentially result from many places. So, so that you can connect properly to the Wifi network with your Crosscall TREKKER-M1, we decided to produce this tuto. So we will find out together what to do and where to look to resolve this problem of Wifi authentication. We will see at first what you must do on the Crosscall TREKKER-M1. At last, we will see what it is important to do and check on your Wifi box.

What to do when the Crosscall TREKKER-M1 has an authentication problem on the Wifi network

Forget the Wifi network on your Crosscall TREKKER-M1

If perhaps the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Crosscall TREKKER-M1 may display the message: Authentication or authentication error . If perhaps the trouble comes from there, the solution is straightforward. Just forget about the Wifi network in your Crosscall TREKKER-M1. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . When it is completed, you can try again to connect to the Wifi network. If the trouble is not solved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a trouble of authentication Wifi on the Crosscall TREKKER-M1 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it is very basic. You should find a synchronization button to press. When ever this is completed, a light will normally start blinking. You’re able to after that try to reconnect to the Wifi network with your Crosscall TREKKER-M1. If perhaps it still doesn’t function, go to the next trick.

Retype Password

Occasionally the authentication problem comes from the way you type the Wifi network security password. Certainly, it is sometimes subtle to type a security password Wifi on its Crosscall TREKKER-M1. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in lots of computer problems, the solution is oftentimes very simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Crosscall TREKKER-M1. After that try to reconnect with your Crosscall TREKKER-M1.

Check box settings

If perhaps non-e of the prior answers did function, the problem could be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to test if the system of key is in WPA / WPA2 . If perhaps this is not the circumstance, choose this option. After that try to connect your Crosscall TREKKER-M1 again to Wifi. If perhaps the authentication trouble continues, we advise that you contact your service provider or a telephone retail store.