At times, the Condor Plume L2 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can potentially be caused by several places. So, so that you may connect properly to the Wifi network with your Condor Plume L2, we decided to write this tuto. So we will discover together what to do and where to look to solve this issue of Wifi authentication. We will see at 1st what you have to do on the Condor Plume L2. Finally, we will see what it’s important to do and check on your Wifi box.
What to do when the Condor Plume L2 has an authentication problem on the Wifi network
Forget the Wifi network on your Condor Plume L2
In the event that the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Condor Plume L2 may display the text: Authentication or authentication error . In the event that the trouble comes from there, the answer is fairly simple. Simply forget about the Wifi network in your Condor Plume L2. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . When it’s completed, you may try again to connect to the Wifi network. If the trouble is not resolved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a trouble of authentication Wifi on the Condor Plume L2 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it’s very simple. You should find a synchronization button to press. When this is completed, a light will normally start blinking. You’re able to then try to reconnect to the Wifi network with your Condor Plume L2. In the event that it still does not function, go to the next trick.
Retype Security password
At times the authentication problem originates from the technique you type the Wifi network password. Certainly, it’s sometimes subtle to type a password Wifi on its Condor Plume L2. We therefore advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in a great many computer problems, the solution is from time to time very simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Condor Plume L2. Then try to reconnect with your Condor Plume L2.
Check box settings
In the event that non-e of the previous solutions did function, the problem might be found to be on the box of your provider. It will therefore be important to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . In the event that this is not the case, choose this option. Then try to connect your Condor Plume L2 again to Wifi. In the event that the authentication trouble persists, we advise that you contact your service provider or a telephone store.
